AVDI
AVDI Plus – Abrites diagnostic interface
Used in 661 guides
- General diagnostics and fault code (DTC) read/clear
- Basic settings — factory reset (throttle body, steering, clutch)
- Adaptations — customer-requested changes
- Long coding — enabling hidden features
- MMI Functions — enable/disable infotainment features
- Wireless CarPlay / Android Auto
- Video in motion
- BCM2 unlock with the ZN080 set (solder-free)
- Reading CS on bench (PCR2.1, Simos 8.x/1x.xx, DCM6.2, TCU AL551/DL501/DQxxx)
- DSG mileage recalibration
- Service Intervals
- ECU programming with .frf files
- Dump Tool — extracting immo data from a dump
- Key Learning — key programming (overview)
- Key Learning Immo 5C MQB (VDO) — spare key in 3 stages
- All Keys Lost Immo 5C MQB (VDO cluster, Hitag PRO keys): ECU/TCU data, cluster on the bench with the ZN085 and keys via OBDII
- Reading MQB 5C/5D immo data from the key's NCF processor
- Immo V adaptation of ECU / TCU / ELV
- Immo V adaptation of the immobilizer (Dashboard / BCM2)
- Diagnostics and vehicle selection (VIN, chassis, over 1300 modules)
- Mercedes-Benz bus and truck diagnostics
- Mercedes Coding (VMAX, side sensors, parameters)
- Mercedes ECU Flashing (CFF files)
- Mercedes FBS4 Manager (722.9 and CRD3 renew, VIN change)
- Smart Functions (DPF mileage reset, DPF ash, VIM, seat belt alarm, sun roof, 360° cameras)
- FBS4 odometer correction with MN030 + emulators (EM008/EM014/EM018)
- Exhaust flaps — exhaust valve control
- CPC Torque limiter — torque limit
- VMax calibration — speed limiter
- Speed Limit Calibration — eVito 447 (electric)
- Mercedes AdBlue Reset: resetting the AdBlue system after component replacement or the remaining mileage warning
- CAN Instrument: connecting and identifying the instrument cluster type
- CAN instrument cluster on TP2.0 (up to 2007): mileage, immo data and key programming
- VDO NEC 2009+: entering service mode and working on mileage, EEPROM, immo and keys
- Magneti Marelli UDS cluster with 9S12: mileage, keys and adaptation
- JCI cluster with NEC and 95320 EEPROM: mileage, EEPROM, immo data and key adding
- A8 (4H) / A7 (4G) / A6 (4G) / Touareg (7P) UDS with 95320: mileage recalibration
- VDO on MQB platform 2014+: mileage correction
- MQB: spare key programming with one working key
- EZS Kessy CAN: getting the login (PIN) and component security
- EZS Kessy CAN: key learning (Q7 / A6 / Allroad)
- EZS Kessy CAN: programming a virgin key as a dealer key
- EZS Kessy CAN: reading and changing the VIN
- EZS Kessy CAN: EEPROM read and write (2KB)
- BCM2 A4/A5/Q5/A6/A7/A8: reading the module over OBDII
- BCM2: dealer key creation and key learning
- BCM2: Alarm OFF and Alarm ON
- BCM2 Audi A6/A7/A8 (2010+) with ALL KEYS LOST
- Instrument cluster via K-Line: EEPROM read/write (mileage, PIN)
- Transferring keys from one RB8 cluster to another
- Fitting a used RB8 cluster: syncing it with the engine ECU
- Clearing the "DEF" error on RB8 / RB4 clusters
- "Engine Control Unit" special functions: flash, EEPROM, PIN and immobiliser
- EDC17/MED17 in boot mode: flash and EEPROM read/write, PIN/CS/MAC and immo bypass
- Reading EDC17/MED17 PIN/CS in "direct mode"
- DPF OFF on EDC16/EDC17 flash dumps
- Simos PCR2.1: unlocking the ECU and reading PIN/CS/MAC
- Component protection generation 1 (A8 2003-2010)
- Component protection generation 2: virgin + learn module
- Setting the CP bytes manually or extracting them from a ConfData dump
- … +601
