Chip-Tools
Dump Tool — extracting immo data from a dump
VAG
Interface New
Keys / Immo
Advanced
⏱ varies
4 steps
Load a dump file and pull the immo data out of various modules. Functions include: TCU Immo Off, checksum correction, Get CS (DQ200/DQ250/DQ381/DQ500/AL551 8HP/DL501/Simos PCR2.1/Simos xx.xx/ELV), Get CS/PIN (EDC17/Kessy).
Required licences
- Licenza VAG
Hardware / cables
- AVDI
Procedure
- Open VAG Online → "Special Functions" → "Dump Tool".
- Load the module's dump file.
- Select the operation (Immo Off, Get CS, Get CS/PIN, checksum correction).
- Run it and save the resulting file.
Reference screenshots
Source: Manuale VAG Online, cap. 4.10 (p.40) · ⏱ estimated time varies
← All Abrites guides
More guides VAG
- General diagnostics and fault code (DTC) read/clear
- Basic settings — factory reset (throttle body, steering, clutch)
- Adaptations — customer-requested changes
- Long coding — enabling hidden features
- MMI Functions — enable/disable infotainment features
- Wireless CarPlay / Android Auto
- Video in motion
- BCM2 unlock with the ZN080 set (solder-free)
- Reading CS on bench (PCR2.1, Simos 8.x/1x.xx, DCM6.2, TCU AL551/DL501/DQxxx)
- DSG mileage recalibration
- Service Intervals
- ECU programming with .frf files