Chip-Tools

ITDEENBGES

Programming a Harley-Davidson spare key with the CB305 cable and the FOB Serial Number

Procedure for programming an additional key on Harley-Davidson bikes through the bike's diagnostic connector. Older models with the 4-pin connector may require the SAE J1850 protocol and therefore the Abrites J1850 adapter.

Procedure

1. Connect the Abrites CB305 cable to the AVDI; for older models with the 4-pin connector add the Abrites J1850 adapter (communication over SAE J1850 protocols).
2. Connect the CB305 to the bike's diagnostic connector: Harley-Davidsons use either a 4-pin connector (older models) or a 6-pin one.
3. Open Abrites Diagnostics for Bikes, Snowmobiles and Water Scooters and open the "Key learning" menu.
4. Select "Harley-Davidson" from the list.
5. Select the free key position and press "Next".
6. Enter the key's FOB Serial Number: it is the serial number supplied with the Harley-Davidson key.
7. If you are in an all keys lost situation, enter the 5-digit PIN to disarm the alarm; if you do not know it, try the default PIN 1-2-3-4-5.
8. Complete the procedure following the on-screen prompts and check the bike starts with the new key.

Reference screenshots