A practical reference for key renewal with the ZN046: where the wires go on the various PCBs and which keys have been added to the supported list. Use it before you put the iron on a customer's key.
Required licences
—
Hardware / cables
ZN046
ZN045
AVDI
⚠ WarningIf the software has no wiring diagram for your key, don't guess: email support@abrites.com with your AVDI ID and a photo of the key showing its product version.
Procedure
Identify the key family: the manual carries photos of the contact points for new-type Porsche HITAG keys, Audi BCM2 keys, BMW F-Series 1st type, BMW F-Series 2nd type, BMW E-Series, Volvo keys and PSA keys.
Match the key part number against the supported list. Audi: 8T0959754 433MHz, 8T0959754A 315MHz, 8T0959754F 433MHz, 4G0959754G 315MHz, 4H0959754G 315MHz, 4H0959754K 868MHz, 8T0959754D 868MHz, 8T0959754G 315MHz, 4G0959754BP/DB/DC 315MHz, 4H0959754DA 433MHz, 4H0959754DB 315MHz, 8K0959754BR 868MHz, 8K0959754D 868MHz.
BMW: F HUF5662 315MHz, F HUF5663 433MHz, F HUF5767 433MHz, F 5WK49662 433MHz, F 5WK49663 315MHz, E 5WK49127 315MHz Remote, E 5WK49145 868MHz Keyless, E 5WK49147 315MHz Keyless.
Solder the wires to the points shown for your model, check with a multimeter that there are no bridges between adjacent tracks, then connect the ZN046 to the ZN045 and the ZN045 to the AVDI.
A correctly soldered PCB is shown on page 32 of the manual for the BMW F-Series HUF key: use it as a visual benchmark for solder quality.
Reference screenshots
Source: Manuale ABPROG (programmatore), cap. 6 (p.25-32) · ⏱ estimated time 15-30 min