Chip-Tools
License viewer: checking which Abrites licenses are active on your AVDI
Strumenti
Interface Classic
Appendix
Basic
⏱ 10 min
5 steps
The License viewer is the utility that lets you check for yourself, at any time, which Abrites licenses are active on your AVDI. Handy before you take a job on, to know whether the special function required is covered.
Required licences
- —
Hardware / cables
- AVDI
Procedure
- Connect the AVDI to the PC where the Abrites software is installed.
- Open the Windows search menu and type "License viewer".
- Start the "License viewer" application from the results.
- Go through the list of licenses active on your AVDI and check that the one the job needs (for example MN026, VN004, VN005, VN006, MN031 or SB001) is there.
- If the required license is missing, buy it before you start work on the vehicle.
Reference screenshots
Source: Manuale AVDI - manuale comune, parte 2 di 2, cap. 7 License viewer (p.87) · ⏱ estimated time 10 min
← All Abrites guides
More guides Strumenti
- ABPROG ZN030: what's in the set, hooking it up to the AVDI and starting the Classic software
- Reading and writing SPI, I2C and Microwire EEPROMs with ABPROG and the ZN031/ZN035 adapter
- Erasing and reprogramming M35080VP / M35080V6 incremental EEPROMs with ABPROG
- Wiring an SPI EEPROM straight to the ABPROG DB25 without the ZN031 adapter
- Mercedes-Benz IR keys: reading the SSID, erasing and programming the NEC with ZN032 / ZN033
- Renewing used keys (HITAG/PCF) with the ZN046 adapter and ABPROG
- Solder points on key PCBs for the ZN046 and list of keys supported for renewal
- Reading the EWS3 dump on BMW E46/E39/E53 and others with the ZN055 adapter
- Reading the EEPROM on BMW F-Series FEM/BDC without desoldering, using the ZN057 extension
- Reading and writing NEC V850ES MCUs with the ZN078 adapter and ABPROG
- ABPROG DB25 pinout: building your own ZN046, ZN058, ZN078 and ZN086 adapters
- Reading the immobiliser from a Renault X95 BCM (and Audi BCM) with ABPROG and direct wiring